What you'll learn

Cisco ACI Architecture
Configuration of Access policy, Fabric policy, Tenant
BD, EPG, VRF, L3Out, Contract Configuration
Cisco APIC Dashboard: System, Tenant, Fabric, Admin, Operation

Requirements

Understanding on Cisco routing, switching, VLAN, IP Address etc.

Description

This course covers Cisco ACI Architecture of single site covering physical and logical network construct being used in Cisco ACI setup. Understanding on how leaf, spine and APIC controller are interconnected to make ACI Fabric. Understanding various protocol (Control plane, data plane and management plane) being used in ACI Fabric for discovery, control plane and data plane communication within ACI fabric and between endpoints. Configuration of leaf and spine via APIC controller from start after ACI Fabric build, which include Cisco ACI Access policy, Fabric policy, Tenant configuration which covers L2 and L3 configuration parameter.This course also covers walkthrough of Cisco APIC dashboard with all sections in details like System, Tenants, Fabric, Admin and Operation. One video covering various kind of Cisco hardware being used to build Cisco ACI setup (include APIC, Leaf and Spine Models)After end of all session, there will be Cisco ACI LAB guide covering 3 scenario which generally used widely in any deployment, This Guide covers Setup, Configuration Step and Verification step of each scenario, expectation is student should be able to make configuration of each scenario and test it (in their own setup) after learning this course. Wish you Best of luck on Learning Cisco ACI.

Overview

Section 1: Introduction
Lecture 1 Course-Agenda
Section 2: Cisco ACI Architecture
Lecture 2 Cisco ACI Topology
Lecture 3 Cisco ACI Component
Lecture 4 Cisco ACI Physical Connectivity
Lecture 5 Cisco ACI Control and Data plane learning
Section 3: Cisco ACI Configuration
Lecture 6 Understanding Access Policy
Lecture 7 Configuration - VLAN Pool, Physical Domain, Attached Entity Profile
Lecture 8 Configuration of Interface Policies
Lecture 9 Configuration of Interface Policy Group
Lecture 10 Configuration of Interface Profile
Lecture 11 Tenant Architecture-1
Lecture 12 Tenant Architecture-2
Lecture 13 Tenant Configuration
Lecture 14 VRF Configuration
Lecture 15 Contract Configuration - Part 1
Lecture 16 Contract Configuration - Part 2
Lecture 17 EPG Configuration
Lecture 18 Fabric Policy Configuration
Section 4: Cisco APIC Walkthrough
Lecture 19 Cisco APIC Walkthrough
Lecture 20 Cisco ACI Hardware Understanding
Section 5: LAB Guide
Lecture 21 ACI LAB Guide
This course is for beginner who wants to learn Cisco ACI who has understanding on basic routing and switching, need to learn configuration from start, doing cisco configuration in regular job
Homepage:

https://www.udemy.com/course/cisco-aci-cisco-aci-architecture-and-configuration/