Build your own virtual CCNA lab network with a small budget

Learn how to successfully combine VMware ESXi virtualization and Cisco CSR 1000v routing software, creating your own lab
Free Download What you'll learn
Learn the basics of virtualization
Learn how to construct your own virtual lab network
Learn how to use the lab network to study for CCNA/CCNP or improve your overall networking skills
Learn about virtual serial connections, tftp servers and remote syslogging
Learn how to set up and work with virtual machines (Linux, Windows)
Learn how to troubleshoot complex network topologies and systems
Learn how to work with networks in Windows and Linux and how to configure Linux services
Learn the basics of Cisco IOS and Cisco IOS XR routing operating systems
Learn how to design a network topology diagram and an IP address plan
Requirements
You need a very basic understanding of computers and networking, you will learn everything else in this course
Description
Note: this course is unique on Udemy (and probably on most of the rest of Internet as well). If you're the least interested in networking, you will benefit greatly from this course.The free options today only take you so far. Emulator software such as the routers in Cisco Packet Tracer lack many of the functions and commands needed for CCNA certification, and they lack a Lot of functions and technologies for CCNP or CCIE.In this course you will learn how to create a lab network using (demo) versions of the real Cisco routing software, which contain support for all advanced routing technologies, including BGP and MPLS.All you need is this course and free (or low cost) software and equipment, like an old left-over computer and a VMware license.IntroductionFREE PREVIEW: IntroductionFREE PREVIEW: Welcome care-package0. PreparationsPreparations: Creating an IP address planPreparations: Designing the network1. InstallationObtain and download the systemPrepare the installation mediaAccess the BIOS setup and change the boot orderInstall, configure and access the hypervisor2. Using the platformBasic initial configuration of the hypervisorInstalling your first virtual machineGetting a Windows license keyInstalling a Windows virtual machine[FAILED attempt]Successfully installing a Windows virtual machineConfigure IP addresses for the VMsConfigure Linux services3. Setting up the virtual routersCreating network topology diagramsLink networks and vlansInstalling virtual IOS routersVirtual serial console connectionsUpdating our network topology diagramInstalling the Cisco IOS XRv 9000Setting up the rest of the routersFREE PREVIEW: OSPF and remote sysloggingBacking up the configRemote administration
Who this course is for
This course is intended for people who want to learn practical networking, but don't have access to real routers
Homepage

https://www.udemy.com/course/virtual-ccna-lab-network/