CAMWorks WireEDM Pro 2023 SP0 for SolidWorks Win x64

New in CAMWorks WireEDM Pro 2023 SP0


1. CWE-754 CSR-22659 A Hole Popper post processor for AGIE Vision control unit needs to be made available in the CAMWorks WireEDM installer.
2. CWE-751 CSR-22291 In CAMWorks WireEDM Pro 2022 SP1, for Inch-based parts, the Wire Guide holders get scaled incorrectly and incorrect holder size gets displayed.
3. CWE-750 CWE-749 CSR-22291 When the specific part programmed using CAMWorks WireEDM Pro 2022 SP0 is opened in CAMWorks WireEDM Pro 2022 SP1, thesimulation for the Wire Guide holders do not get displayed.
4. CWE-746 CSR-22461 In CAMWorks WireEDM Pro Help file, within the Leadin/ Leadout dialog box, the description for the control parameter "Overlap" is not presentwhen the feature type is set to 'Open'.
5. CWE-745 CSR-22459 Information associated with "Reverse Skim Cuts" option and "Begin all cuts at start hole" option needs to be added in CAMWorks WireEDMPro Help file.
6. CWE-741 CSR-22165 When any part is programmed in CAMWorks WireEDM Inch modeusing an AGIE machine and then simulation is run using an 'AsDesigned' STL file for comparison, a size conversion issue is observed if the STL file was programmed in mm units. During the simulation, the STL file is observed to be 25.4 times smaller as its units have not been correctly converted.
7. CWE-740 CSR-22227 In CAMWorks WireEDM Pro 2022 SP1 when using AgieVision machine for any part, the option "Optimize for finish" under the AgieVision tab of '2 Axis Contour' dialog box disappears on mouseover.
8. CWE-705 CSR-21966 When editing a 2 Axis Wire EDM profile, the "Optimize for Finish"checkbox under the 2 Axis Contour dialog box disappears when hovering the mouse around the checkbox.
9. CWE-694 CSR-21798 The EDM Settings/Post option for "Output cuts to separate files" should be removed from the UI as this option is no longer supported.
10. CWE-693 CSR-21797 When the radius value for the Leadin/Leadout type "Point Blend" is updated and saved, it does not get saved. Additionally, when the operation is closed and reopened the previously assigned radius value is displayed.





CAMWorks WireEDM Prois a newly introduced application in the CAMWorks suite of software products. It is a culmination of over 30 years of specialization in Wire EDM CAM technology. CAMWorks WireEDM Pro is seamlessly integrated to work as an Add-in within theSOLIDWORKS/CAMWorks Solids CADapplications. It is designed to automatically analyze a solid model, generate a machining plan for all the features (2 Axis, 2 Axis Taper, 4 Axis) and then post the G-Code with a single mouse click! It applies the cutting technology of your Wire EDM machine to the geometry of the solid model to be machined to generate the best possible G-code for your machine. This functionality allows you to take full advantage of all the latest cutting improvements in the field of Wire EDM technology. CAMWorks Wire EDM Pro will be an ideal choice for firms working with machining solid part models using WireEDM CAM technology.

CAMWorks WireEDM Demo

GeometricPLMby HCL Technologies a specialist in the domain of engineering solutions, services and technologies. Its portfolio of Global Engineering services, Product Lifecycle Management (PLM) solutions, Embedded System solutions, and Digital Technology solutions enables companies to formulate, implement, and execute global engineering and manufacturing strategies aimed at achieving greater efficiencies in the product realization lifecycle.